Käyttäjä:Masa

Kulmapaikasta
Versio hetkellä 29. kesäkuuta 2015 kello 12.03 – tehnyt Masa (keskustelu | muokkaukset) (Add how to disable recently used files in GTK+)
(ero) ← Vanhempi versio | Nykyinen versio (ero) | Uudempi versio → (ero)
Siirry navigaatioon Siirry hakuun

masa on noob. masa on myöskin sähkötekniikkaa "opiskeleva" noob. masa ylläpitää omaa palvelintaan, jonka nimi on tällä hetkellä quad. quadilla pyörii irssi, webbiserveri, pellettipolttimen logitussoftat, git-repoja, Minecraft-palvelimia ja toisinaan sekalaisia muitakin pelipalvelimia.

masa's random collection of Linux configuration stuffs

Disable the Recently used files list in GTK+ 2.x and GTK+ 3.x

In GTK+ 2.x
rm ~/.local/share/recently-used.xbel
echo gtk-recent-files-max-age=0 >> ~/.gtkrc-2.0

Note: At least with LXAppearance installed, add that config value to the file ~/.gtkrc-2.0.mine instead!

In GTK+ 3.x
rm ~/.local/share/recently-used.xbel
echo gtk-recent-files-max-age=0 >> ~/.config/gtk-3.0/settings.ini
echo gtk-recent-files-limit=0 >> ~/.config/gtk-3.0/settings.ini

Note: If the file didn't exist, add "[Settings]" to the top of it!

Swap the left and right channels with pulseaudio

Copy the following config: 

cp -pi /etc/pulse/default.pa ~/.pulse/default.pa

Edit the config, add the following two lines to the end: 

load-module module-remap-sink sink_name=reverse-stereo master=1 channels=2 master_channel_map=front-right,front-left channel_map=front-left,front-right
set-default-sink reverse-stereo

Restart PulseAudio by running pactl exit at the command line.

This configuration makes a few basic assumptions: that the card you're reversing the channels of is card 0; that you only have to deal with 2 channels; and that those channels are called front-left and front-right. If you have a videocard with HDMI out, it is likely the analog out of your motherboard will be card 1, not 0; so master=1.

References: (http://www.freedesktop.org/wiki/Software/PulseAudio/FAQ
http://superuser.com/questions/59481/how-to-swap-stereo-channels-in-ubuntu
http://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/Modules#module-remap-sink )

Gnome 3: keyboard shortcuts

dconf-editor -> org.gnome.desktop.wm.keybindings

Gnome 3: Get rid of the annoying sub-window thingies

Open: dconf-editor
Browse to: org -> gnome -> shell -> overrides -> attach-modal-dialogs
And set it to: false

Gnome 3: font hinting/antialiasing stuff

Found in org.gnome.settings-daemon.plugins.xsettings

Gnome 3: Fix the clock

Configured in gnome-tweak-tool (used to be: dconf-editor: org.gnome.shell.clock -> show-date and show-seconds: true)

Gnome 3: Add the minimize button

gnome-tweak-tool (Advanced Settings)
Shell -> Arrangement of buttons on the title bar

Gnome 3: application shortcuts/names/icons (with shell search)

Add and edit *.desktop files located in:
/usr/share/applications/<name>.desktop
/usr/local/share/applications/<name>.desktop
~/.local/share/applications/<name>.desktop

Gnome 3: Disable desktop animations

(This was previously done with an extension, see below in "not in use" section). dconf-editor:
org.gnome.desktop.interface.enable-animations -> set to false

Gnome 3: default applications

nano /usr/share/applications/mimeinfo.cache
nano ~/.local/share/applications/mimeapps.list

For default file manager, have for example this: 

inode/directory=pcmanfm.desktop;nautilus.desktop;Thunar-folder-handler.desktop;

Gnome 3: useful extensions and configs

List updated for Gnome 3.12.x @ 2014-10-15

Installed, in use:

(* https://extensions.gnome.org/extension/109/pulse-audio-shortcuts/ (not updated ;_;))

Installed, not in use

Not installed, outdated, etc. but interesting

Gnome 3 extension configs (NOTE: outdated/not needed as of Gnome 3.12)

Evil Status Icon Forever

~/.local/share/gnome-shell/extensions/EvilStatusIconForever@bone.twbbs.org.tw/extensions.js 

/*****************************************************
 * Statuc Icon Settings
 ****************************************************/

// Add application you want it shows their notification status
// icon on top bar to the following list.

// You may use top/htop to find out the name of application.


var notification = [
    'pidgin',       // Pidgin IM Client
    'hime',         // HIME Imput Method Editor
    'dropbox',      // Drop Box
    'linuxdcpp',    // LinuxDC++
    'mail-notification',// mail-notification
    'firefox',          // Firefox with FireTray
    'skype'             // Skype
//    'deadbeef',     // Deadbeef Music Player
//    'gcin',         // GCIN Chinese Input Method
//    'thunderbird-bin',  // Thunderbird-bin (Gentoo binary package)
//    'thunderbird',      // Thunderbird
//    'firefox-bin',      // Firefox-bin (Gentoo binary package)
//    'workrave',         // Workrave
//    'gajim',            // Gajim
//    'wicd-client.py',   // Wicd-gtk
]

// Add which built-in status icon you want to remove in the
// following list.
//

var removeStatusIcon = [
    'a11y',         // Accessibility
    // 'volume',
    // 'battery',
    // 'keyboard',
    // 'bluetooth',
    // 'network'
]

/******************************************************
 * Don't touch anything below!
 *****************************************************/

gnome-shell-extension-weather

git clone git://github.com/simon04/gnome-shell-extension-weather.git gnome-shell-extension-weather.git
cd gnome-shell-extension-weather.git
git checkout gnome3.4
./autogen.sh --prefix=/usr
make
sudo make install

gsettings set org.gnome.shell.extensions.weather unit celsius
gsettings set org.gnome.shell.extensions.weather wind-speed-unit m/s
gsettings set org.gnome.shell.extensions.weather city Lappeenranta
gsettings set org.gnome.shell.extensions.weather show-sunrise-sunset true
gsettings set org.gnome.shell.extensions.weather woeid FIXX0040


Some useful commands

Record an area from the screen

Record a region from screen, with audio (can be used to record for example Minecraft). Shows the region outlines to align the window. 

ffmpeg -f x11grab -show_region 1 -r 25 -s 1280x720 -i :0.0+500,80 -c:v libx264 -preset fast -crf 22 -f alsa -i pulse -c:a libvorbis -b:a 96k -threads 0 -f matroska sda6/minecraft_withertaistelu_overview_2012-11-24_2.mkv

Another sometimes useful option fo x11grab:
-follow_mouse centered|<PIXELS>

When it is specified with "centered", the grabbing region follows the mouse pointer and keeps the pointer at the center of region; otherwise, the region follows only when the mouse pointer reaches within PIXELS (greater than zero) to the edge of region.

Encode images into a (timelapse) video

ffmpeg -f image2 -i ms_all/shot_%06d.png -r 25 -c:v libx264 -preset medium -crf 25 -an -threads 0 -f matroska rakennustapahtuma_2012-11-03_crf25_medium.mkv

Some random web stuff

Generate a SSL-key: 

openssl req -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -nodes -days 1001


Random shell scripts

Safely shutdown a SATA hard drive (spins it down). Umount first! Usage example: scsiremove /dev/sdb

/usr/local/bin/scsiremove (needs sys-block/scsiadd and sys-fs/lsscsi):

#!/bin/sh

if [ $# -ne 1 ]; then
        echo "Usage: $0 <device>"
        exit 1
fi

if ! which lsscsi >/dev/null 2>&1; then
        echo "Error: lsscsi not installed";
        exit 1
fi

if ! which scsiadd >/dev/null 2>&1; then
        echo "Error: scsiadd not installed"
        exit 1
fi

device=`lsscsi | grep $1`

if [ -z "$device" ]; then
        echo "Error: could not find device: $1"
        exit 1
fi

hcil=`echo $device | awk \
'{split(substr($0, 2, 7),a,":"); print a[1], a[2], a[3], a[4]}'`

scsiadd -r $hcil

Merge together video files in matroska containers (needs media-video/mkvtoolnix).

/usr/local/bin/merge.sh:

#!/bin/bash

ALL="empty"
DSTDIR=${1}
FILES=${2}

for i in $(ls ${FILES}*)
do
        if [ "$ALL" = "empty" ]; then
                ALL=${i}
                FIRST=${i}
        else
                ALL="${ALL} + ${i}"
        fi
done

#COMBINED=$(basename $FIRST | sed "s/\.mkv/_all.mkv/")
COMBINED=`basename ${FIRST} | sed "s/\.\([a-zA-Z0-9]\{1,10\}\)$/_all\.\1/"`

if [ -f "${DSTDIR}${COMBINED}" ];
then
        echo "Error: the target file already exists!"
        exit
fi

#echo "mkvmerge $ALL -o ${DSTDIR}${COMBINED}"
mkvmerge $ALL -o ${DSTDIR}${COMBINED}
touch ${DSTDIR}${COMBINED} -r ${FIRST}

Encode videos into matroska container, with Ogg Vorbis audio and h.264 video (with x264 library). Needs media-video/ffmpeg, media-libs/libvorbis and media-libs/x264.

encode.sh:

#!/bin/bash

SRCDIR=/home/masa/Media/Fraps/Fraps/
DSTDIR=/home/masa/f/

SAVEIFS=$IFS
IFS=$(echo -en "\n\b")

for i in $(ls ${SRCDIR}javaw*avi)
#for i in $(ls ${SRCDIR}KillingFloor*avi)
#for i in $(ls ${SRCDIR}*.avi)
#for i in $(ls ${SRCDIR}Terraria*avi)
do
#	DST=$(echo ${i/avi/mkv})
#	DST=$(echo ${i/ /_})

	i=$(basename $i | sed "s/^\.\///")
#	DST=$(echo $i | sed "s/avi/mkv/" | sed "s/ /_/g")
#	DST=$(echo $i | sed "s/mpeg/mkv/" | sed "s/ /_/g")

	DST=$(echo $i | sed "s/\.[a-zA-Z0-9]\{1,10\}$/\.mkv/" | sed "s/ /_/g")
#	echo "$i -> $DST"

##########################
# Tämä on se perinteinen:
	ffmpeg -i ${SRCDIR}"${i}" -c:a libvorbis -b:a 96k\
		-r 25 -c:v libx264 -preset slow -crf 25 -threads 0\
		-f matroska ${DSTDIR}${DST}

	chown masa:masa ${DSTDIR}${DST}
	chmod 644 ${DSTDIR}${DST}
	touch ${DSTDIR}${DST} -r ${SRCDIR}"${i}"

done
IFS=$SAVEIFS

A script I used to symlink multishot screenshots into linearly increasingly named ones for ffmpeg encoding:

lnlinear.sh:

#!/bin/bash

#echo "?: $? #: $# 0: $0 1: $1 2: $2"
num=0

if [ $# -ne 1 ];
then
	exit 1
fi

for i in `ls $1`
do
	for j in `ls -tr ${1}/${i}`
	do
		num=`echo "${num} + 1" | bc`
		#echo "$j -> ${num}"
		#printf "$j -> shot_%06d.png\n" ${num}
		name=`printf "shot_%06d.png\n" ${num}`
		#echo $name
		#echo "ln -s /home/masa/ms/${i}/${j} /home/masa/ms_all/${name}"
		ln -s /home/masa/ms/${i}/${j} /home/masa/ms_all/${name}
	done
done

HDD/SSD/Filesystem check and repair related stuff

# Run a read-only badblocks test on a ext2/ext3/ext4 filesystem
e2fsck -c -v /dev/sda7

# Run a non-destructive read-write badblocks test on a ext2/ext3/ext4 filesystem
e2fsck -c -c -v /dev/sda7

# Show the list of known bad blocks on a ext2/ext3/ext4 filesystem
dumpe2fs -b /dev/sda7

http://smartmontools.sourceforge.net/badblockhowto.html
(A local copy is found in /data/softa/text/tutorial/badblockhowto.html)

Webcam stuff

Get the software here:
http://www.firestorm.cx/fswebcam/

fswebcam.sh:

#!/bin/bash

DSTPATH="/home/masa/ware/webcam/"
#DSTPATH="/home/masa/ware/webcam/fswebcam_2013-05-25_2"
CONFIG_NIGHT="/home/masa/.fswebcam_config_night.txt"
CONFIG_DAY="/home/masa/.fswebcam_config_day.txt"
COUNTERFILE="/tmp/fswebcam_counter.txt"
#TIMESTAMP=`date "+%Y-%m-%d_%H-%M-%S"`
#FILENAME="webcam_${TIMESTAMP}.jpg"
MONTH=`date "+%Y-%m"`
DIR="${DSTPATH}${MONTH}/"
FILENAMEFORMAT="webcam_%08d.jpg"

#PWD=`pwd`

if [ ! -d "${DIR}" ];
then
	echo "foo"
#	mkdir ${DIR}
fi

if [ -f "${COUNTERFILE}" ];
then
	COUNTER=`cat ${COUNTERFILE}`
	COUNTER=`expr ${COUNTER} + 1`
#	let COUNTER=${COUNTER}+1
#	COUNTER=$((${COUNTER}+1))

	FILENAME=`printf ${FILENAMEFORMAT} ${COUNTER}`

	if [ -f "${DIR}${FILENAME}" ];
	then
#		COUNTER=`ls ${DIR}webcam_*.jpg | wc -l`
		# Take the last file's number and increment it by one
		COUNTER=`ls ${DIR}webcam_*.jpg | tail -n 1 | sed "s/.*webcam_\([0-9]\+\)\.jpg/\1/"`
		COUNTER=`expr ${COUNTER} + 1`
	fi
else
#	COUNTER=1
#	COUNTER=`ls ${DIR}/webcam_*.jpg | wc -l`
	# Take the last file's number and increment it by one
	COUNTER=`ls ${DIR}webcam_*.jpg | tail -n 1 | sed "s/.*webcam_\([0-9]\+\)\.jpg/\1/"`
	COUNTER=`expr ${COUNTER} + 1`
fi

echo -n ${COUNTER} > ${COUNTERFILE}
FILENAME=`printf ${FILENAMEFORMAT} ${COUNTER}`

##### DEBUGGING #######
#ls ${DIR}webcam_*.jpg
#echo "DIR: ${DIR}"
#echo "FILENAME: ${FILENAME}"
#NUM=`ls ${DIR}webcam_*.jpg | tail -n 1 | sed "s/.*webcam_\([0-9]\+\)\.jpg/\1/"`
#echo "NUM: ${NUM}"
#FOO=`ls /tttmp/webcam_*.jpg | tail -n 1 | sed "s/.*webcam_\([0-9]\+\)\.jpg/\1/"`
#FOO=`expr ${FOO} + 1`
#echo "FOO: $FOO"
#exit
#######################

#cd ${DIR}

# Use separate configs for day and night so we can adjust the number of samples
# we take and interpolate, because night time shots have more noise.
# During winter, consider hours between 16..08 as night (= dark).
#if [ "`date +%H`" -ge "16" ] || [ "`date +%H`" -le "08" ]
# During summer, consider hours between 23..03 as night (= dark-er).
if [ "`date +%H`" -ge "23" ] || [ "`date +%H`" -lt "04" ]
then
	/usr/local/bin/fswebcam -c ${CONFIG_NIGHT} ${DIR}${FILENAME}
else
	/usr/local/bin/fswebcam -c ${CONFIG_DAY} ${DIR}${FILENAME}
fi

#cd ${PWD}

fswebcam_config.txt:

# config file for fswebcam

# Device
device v4l2:/dev/video0

# Input
input 0

# Palette to use
palette MJPEG

# Resolution
resolution 1280x720

# The number of frames to capture
# Interpolate 4 frames during night (= dark and noisy)
frames 4
# Interpolrate 1 or 2 frames during day (= bright)
#frames 1

# Number of frames to skip when starting capture
skip 15

# Delay (in seconds) after opening the device
#delay 1

# Continually capture images with interval of 60 seconds
#loop 60

# Offset when loop recording
#offset 1

# Draw the banner at the bottom of the screen
bottom-banner

# Select the font to use and a size
font /usr/share/fonts/corefonts/verdana.ttf:14

# Set the main title
#title Title text
no-title

# Set the subtitle
#subtitle Subtitle text
no-subtitle

# Set the info text
#info Info text
no-info

# Banner colour
#banner-colour #40263A93
banner-colour #FF000000

# Separator line colour
#line-colour #00FF0000
line-colour #FF000000

# Text colour
text-colour #00FFFFFF

# Enable or disable text shadow
shadow
#no-shadow

# Set the timestamp format
timestamp "%Y-%m-%d %H:%M:%S"

# Select the image format and compression level
jpeg 85
#png 9

# Set some controls
#set "Power Line Frequency"="50 Hz"
#set "Brightness"="0"

# Set the log file
#log fswebcam.log

Filter out cron messages from /var/log/messages (using syslog-ng logger)

In /etc/syslog-ng/syslog-ng.conf, add and change: 

# Create a filter:
filter f_croninfo { level(info) and not facility(cron); };
# for example before the line:
destination messages { file("/var/log/messages"); };

# Add the following and comment the original line
log { source(src); filter(f_croninfo); destination(messages); };
#log { source(src); destination(messages); };

The most important configs for a Funtoo installation (a bit outdated!)

/etc/portage/package.use/10-all: 

app-misc/gentoo -nls -fam
app-misc/geoclue -modemmanager
app-misc/tracker -applet -ffmpeg
app-portage/eix -deprecated
app-portage/layman -bazaar -cvs git -mercurial -subversion
app-text/lcdf-typetools kpathsea	# for texlive
dev-python/imaging -truetype
dev-embedded/libftdi -tools
dev-embedded/openocd ftdi segger stlink usb versaloon
dev-java/sun-jdk nsplugin
dev-lang/python sqlite
dev-libs/DirectFB vdpau
dev-libs/folks eds # +eds for folks required by gnome-contacts via Gnome 3.4 upgrade
dev-libs/libxml2 icu # chromium (via deps?) needs +icu
#dev-python/setuptools python_abis_3.2 # required by Chromium update via python deps 2014-02-06
dev-util/cmake -qt4
dev-vcs/git gtk tk
gnome-base/gdm -fallback
gnome-base/gnome -fallback -extras # 2014-02-12 added -extras
gnome-base/gnome-vfs -gnutls
gnome-base/gvfs udisks
gnome-extra/evolution-data-server vala # required by upgrades on 2014-10-14
mail-client/mail-notification gmail imap pop ssl
media-gfx/blender -ffmpeg	# compilation fails with ffmpeg support enabled, probably because of ffmpeg -> libav change (??)
media-libs/grilo playlist # 2014-10-15 required by totem-3.12
media-libs/freetype -infinality kpathsea -lcdfilter	# kpathsea for texlive; -lcdfilter for cairo (2012-09-03); -infinality for Gnome 3.4 upgrade clean-up; infinality and lcdfilter enabled 2012-10-27 for better fonts; screw that, disabled again 2012-10-30; infinality enabled again 2014-02-10, required by eselect-lcdfilter-2
media-libs/fontconfig cleartype -lcdfilter # -lcdfilter for these required by world update via some deps (2012-07-23); cleartype added 2012-09-03 via cairo dep; lcdfilter enabled 2012-10-27; disabled 2012-10-30
media-libs/libpng apng	# unofficial animated PNG support for ff 4.0.1
media-libs/libtheora encode
media-libs/mesa -gallium -g3dvl -llvm -xorg -xvmc -xa gbm -gles1 -gles2 video_cards_i965
#media-libs/x264 10bit
media-plugins/alsa-plugins pulseaudio
media-plugins/audacious-plugins -ffmpeg
media-sound/audacity id3tag ffmpeg vamp
media-sound/rhythmbox -cdr -gnome-keyring -lastfm
media-sound/sox amr encode id3tag
media-video/avidemux -amr -qt4
# avx for Core i5/i7:
media-video/ffmpeg aacplus amr celt gsm faac libsoxr network vaapi vdpau vpx
media-video/libav amr avx celt gsm faac vpx
media-video/mkvtoolnix -qt4 -wxwidgets
media-video/mplayer amr openal pvr vaapi vdpau win32codecs
media-video/mpv vaapi vdpau
media-video/projectx java6
#media-video/x264-encoder -10bit
net-analyzer/vnstat gd
net-dns/dnsmasq -nls
net-im/empathy -geocode # Gnome 3.4 upgrade related clean-ups
net-im/pidgin -gstreamer gnutls
net-im/skype qt-static
net-libs/gtk-vnc gtk3
net-libs/libssh server
net-libs/xulrunner java -networkmanager
net-misc/networkmanager -nss modemmanager -ppp
net-misc/openssh -ldap
net-nds/openldap sasl # required on world update: cxx? ( sasl )
net-p2p/retroshare cli qt4
sci-visualization/gnuplot -pdf plotutils
sys-apps/hal -crypt
sys-apps/gnome-disk-utility fat
sys-block/parted -device-mapper
sys-devel/gcc -gtk
sys-devel/gettext cvs git # avoid recompile by world updgrade (2012-09-03)
sys-fs/udev extras keymap # keymap added 2014-04-05 for x11-drivers
sys-libs/zlib minizip	# required by chromium upgrade (2012-11-15)
sys-power/upower deprecated # 2014-10-15 needed to fix telepathy-mission-control not building
virtual/udev gudev hwdb keymap # required by gst-plugins-v4l2 -> ... -> pitivi (2012-12-05)
x11-base/xorg-server -hal
x11-drivers/xf86-video-intel sna uxa
x11-libs/cairo cleartype directfb -lcdfilter
x11-libs/libdrm libkms video_cards_intel
x11-libs/libfm -automount
x11-libs/libva vdpau

# For mkvtoolnix upgrade 2014-02-10: # 20 needed via virtual/rubygems funny dep I think @ 2014-02-12
dev-ruby/json -ruby_targets_ruby18 ruby_targets_ruby19
dev-ruby/racc -ruby_targets_ruby18 ruby_targets_ruby19
dev-ruby/rake -ruby_targets_ruby18 ruby_targets_ruby19
dev-ruby/rdoc -ruby_targets_ruby18 ruby_targets_ruby19
dev-ruby/rubygems -ruby_targets_ruby18 ruby_targets_ruby19

dev-db/sqlite fts3 secure-delete	# required by firefox-3.6
www-client/firefox java -networkmanager

cross-msp430-unknown-elf-gnu/binutils -selinux
cross-msp430/msp430-gdb dev-embedded msp430-gdb
cross-msp430/insight dev-util insight
cross-msp430/msp430-binutils -selinux -multilib
cross-msp430/msp430mcu -selinux -multilib
cross-msp430/msp430-libc -selinux -multilib
cross-msp430/msp430-gcc -fortran -openmp -selinux -boundschecking -d -gtk -gcj -libffi -mudflap -objc -objc++ -objc-gc -multilib

cross-avr/avr-libc -selinux multilib
cross-avr/binutils -selinux multilib
cross-avr/gcc -fortran -selinux -boundschecking -d -gtk -gcj -libffi -mudflap -objc -objc++ -objc-gc multilib
cross-avr/gdb sys-devel gdb
cross-avr/insight dev-util insight

/etc/portage/package.unmask/10-all: 

dev-embedded/openocd
dev-libs/mpc
media-gfx/gthumb

#sci-electronics/kicad

x11-drivers/xf86-video-intel
x11-libs/libdrm
media-libs/mesa

/etc/portage/package.mask/10-all: 

>=app-misc/gentoo-0.16
>=dev-embedded/avrdude-6
>=dev-embedded/libftdi-0.21
>=dev-python/imaging-2
>=dev-java/oracle-jdk-bin-1.8
>dev-vcs/gitg-0.2.7 # 2014-02-12 mask for requiring masked gtksourceview and webkit-gtk versions
>=sci-electronics/eagle-5
>sci-electronics/kicad-20120119_p3256
>=www-client/chromium-35

USE-flags and other changes in /etc/make.conf: 

LINGUAS="en_GB"
SANE_BACKENDS="niash"

CAMERAS="canon ptp2"
INPUT_DEVICES="keyboard mouse evdev"
VIDEO_CARDS="i965 intel vesa"

RUBY_TARGETS="ruby18"	# to limit the dependencies for mkvtoolnix

USE="	-arts -cups -eds -hal -java -javascript\
	-kde -libwww -musepack -networkmanager -php -qt -samba -xmlrpc\
	X a52 aac acpi alsa\
	avi avx bluetooth bzip2 cairo consolekit dbus dga dirac dvb\
	exif faac faad fam ffmpeg firefox flac gif gimpprint gnome\
	gnome-keyring gnutls gphoto2 gtk gtk2\
	gstreamer jpeg jpeg2k imagemagick imlib introspection lame lcdfilter\
	lcms libnotify lm_sensors mad\
	matroska mmx mmxext mp3 mpeg msn nautilus nls nptl ogg\
	oggvorbis opengl pdf png policykit pulseaudio qt3support\
	scanner schroedinger sdl\
	speex spell sse sse2 sse3 ssse3 sse4 sse4_1 sse4_2\
	svg tagwriting theora threads tiff truetype unicode usb v4l\
	v4l2 vorbis vpx win32codecs x264 xinerama xv xvmc xvid"


ACCEPT_LICENSE="dlj-1.1 Oracle-BCLA-JavaSE cadsoft RTCW-ETEULA skype-eula AdobeFlash-11.x"

CHOST="x86_64-pc-linux-gnu"

CFLAGS="-march=native -O2 -pipe"
CXXFLAGS="${CFLAGS}"

ACCEPT_KEYWORDS="~amd64"

PORTDIR_OVERLAY=/usr/local/portage

FETCHCOMMAND="/usr/bin/wget -t 5 -T 60 -nv --passive-ftp -O \"\${DISTDIR}/\${FILE}\" \"\${URI}\""
RESUMECOMMAND="/usr/bin/wget -c -t 5 -T 60 -nv --passive-ftp -O \"\${DISTDIR}/\${FILE}\" \"\${URI}\""

SYNC="git://github.com/funtoo/ports-2012.git"

MAKEOPTS="-j5"

FEATURES="ccache mini-manifest sandbox"

CCACHE_SIZE="1G"

PORTAGE_ELOG_CLASSES="warn error log info qa"

PORTAGE_ELOG_SYSTEM="save"

source /var/lib/layman/make.conf

/var/lib/portage/world: 

app-admin/conky
app-admin/gkrellm
app-admin/pwgen
app-admin/sudo
app-admin/syslog-ng
app-arch/p7zip
app-arch/unrar
app-crypt/mcrypt
app-editors/curses-hexedit
app-editors/dhex
app-editors/ghex
app-editors/gvim
app-editors/hexcurse
app-editors/hexedit
app-editors/sublime-text
app-misc/gentoo
app-misc/screen
app-misc/uptimed
app-portage/eix
app-portage/genlop
app-portage/gentoolkit
app-portage/layman
app-text/texlive-core
app-text/xdvik
cross-avr/avr-libc
cross-avr/binutils
cross-msp430/msp430-binutils
dev-embedded/avrdude
dev-embedded/libftdi
dev-embedded/mspdebug
dev-java/oracle-jdk-bin
dev-lang/jimtcl
dev-libs/openssl
dev-python/gnome-keyring-python
dev-python/imaging
dev-texlive/texlive-fontsrecommended
dev-texlive/texlive-langenglish
dev-texlive/texlive-langfinnish
dev-texlive/texlive-latex
dev-texlive/texlive-pictures
dev-util/beediff
dev-util/ccache
dev-util/diffuse
dev-util/geany
dev-util/imediff2
dev-util/strace
dev-util/tkdiff
dev-util/valgrind
dev-util/xdelta
dev-vcs/git
dev-vcs/gitg
dev-vcs/mercurial
gnome-base/gnome
gnome-extra/gnome-calculator
gnome-extra/gnome-system-monitor
gnome-extra/gnome-tweak-tool
gnome-extra/nautilus-dropbox
kde-misc/kdiff3
mail-client/mail-notification
media-fonts/corefonts
media-fonts/freefonts
media-fonts/ttf-bitstream-vera
media-gfx/feh
media-gfx/gimp
media-gfx/gnome-font-viewer
media-gfx/gnome-screenshot
media-gfx/gpicview
media-gfx/gqview
media-gfx/gthumb
media-gfx/imagemagick
media-gfx/inkscape
media-gfx/scrot
media-gfx/viewnior
media-libs/libgphoto2
media-libs/libjpeg-turbo
media-libs/libtxc_dxtn
media-libs/mesa
media-libs/x264
media-sound/alsa-utils
media-sound/audacious
media-sound/audacity
media-sound/mumble
media-sound/ncmpcpp
media-sound/oggsplit
media-sound/ogmtools
media-sound/paprefs
media-sound/pavucontrol
media-sound/pavumeter
media-sound/rhythmbox
media-sound/sox
media-sound/vorbis-tools
media-tv/linuxtv-dvb-apps
media-video/avidemux
media-video/mjpegtools
media-video/mkvtoolnix
media-video/mplayer
media-video/mpv
media-video/projectx
net-analyzer/gnome-nettool
net-analyzer/nettop
net-analyzer/nmap
net-analyzer/traceroute
net-analyzer/vnstat
net-dns/dnsmasq
net-irc/irssi
net-libs/gnutls
net-libs/gtk-vnc
net-misc/bridge-utils
net-misc/dhcpcd
net-misc/ntp
net-misc/openssh
net-misc/vinagre
net-misc/youtube-dl
net-p2p/linuxdcpp
sci-electronics/eagle
sci-electronics/gerbv
sci-electronics/kicad
sys-apps/gptfdisk
sys-apps/hdparm
sys-apps/pciutils
sys-apps/portage
sys-apps/sdparm
sys-apps/smartmontools
sys-block/scsiadd
sys-boot/grub-legacy
sys-devel/bc
sys-devel/crossdev
sys-devel/gcc
sys-devel/gdb
sys-fs/eudev
sys-fs/lsscsi
sys-fs/reiserfsprogs
sys-fs/sshfs-fuse
sys-kernel/gentoo-sources
sys-power/acpid
sys-power/powertop
sys-process/lsof
sys-process/vixie-cron
virtual/ffmpeg
www-client/chromium
www-client/firefox
www-plugins/adobe-flash
www-servers/lighttpd
x11-base/xorg-x11
x11-drivers/xf86-video-intel
x11-libs/libdrm
x11-libs/libvdpau-va-gl
x11-misc/gcolor2
x11-misc/lightdm
x11-misc/pcmanfm
x11-misc/vdpauinfo
x11-plugins/pidgin-libnotify
x11-terms/eterm
x11-terms/gnome-terminal
x11-terms/roxterm
x11-terms/xterm
x11-wm/fluxbox
x11-wm/openbox
xfce-base/thunar

Random useful links

http://net.tutsplus.com/tutorials/php/why-you-should-be-using-phps-pdo-for-database-access/

Noudettu kohteesta ”http://kulmapaikka.dy.fi/index.php?title=Käyttäjä:Masa&oldid=972”